Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Products

Total 253 items

PT36

Sensor Ø c. 3,5mm for motor winding. Sensor is sealed into tube from insulation material, case is not exactly cylindrical.
  • sealed design, stem from insulation material
  • -40…+150°C (class „F“)
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €15.80 excl. VAT

PT33

Flat design for stator slot.
  • sensor is sealed into laminated plastic material and covered by teflon shrinkable tube
  • -40…+180°C (class „H“)
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €17.60 excl. VAT

PT38 80°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -30…+80°C with PVC cable
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €27.10 excl. VAT

PT38 200°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, PTC, thermocouples…
  • temperature range -40…+200°C with cable MCBE-AFEP
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €27.10 excl. VAT

PT38 350°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
  • temperature range -10…+350°C with cable BIMV-CNTEVS
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €27.10 excl. VAT

PT40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €50.70 excl. VAT

PTP40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €101.70 excl. VAT

PTP50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
    • it can be use transmitters
         - PP200 with output 4…20mA
         - PP300 with output 0…10V
         - PX300 with output 4…20mA with galvanic isolation
  •    - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €94.40 excl. VAT

PT50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56.
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €53.40 excl. VAT

PTP50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €102.30 excl. VAT

PT55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €46.70 excl. VAT

PTP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €94.40 excl. VAT

PT50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €44.00 excl. VAT

PTP50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €91.70 excl. VAT

PMP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Small aluminium connection head with stainless stem, IP56. Output 4…20mA.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • inbuilt programmable transmitter PMA300 with 4…20mA output
  • power supply by output loop 8…30V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter PMA300

from €106.20 excl. VAT

PTxx-R

new
Cable output with 90°angle
  • sawing of space
  • it can be add for all cable sensors with stem diameter 6mm

+ €2.90 excl. VAT

PT31K (DIN)

Temperature sensor for liquids with easy connecting by connector DIN43650. Optional dimensions and design.
  • connector DIN43650
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
  • temperature range: -30…+100° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP65
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €31.10 excl. VAT

PTP10K

Snímač teploty pro montáž na stěnu, plastové pouzdro s kabelovým teploměrem, velmi odolné provedení (IP65), výstup 4..20mA, 0..10V nebo RS485 (ASCII nebo MODBUS).
  • určen pro montáž na stěnu s krytím IP65
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0…10V
       - PPL100 s výstupem ASCII nebo MODBUS
       - PX300 s s výstupem 4…20mA a galvanickým oddělením
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah, min. rozpětí 10°C
  • přesnost ±0,3% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €99.50 excl. VAT

PT35

Temperature sensor for bearing, adjustable length. Adjustable threads is not hermetic. Metal parts are made from  stainless steel 17248, optional dimensions and design.
  • adjustable immersion length, adjustable thread M12x1,75 or G1/2 or others by request - inclusive hermetic design.
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -40…+150°C (T=c. 15sec)
  • dielectric strength: 1500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €50.20 excl. VAT

PT34

Miniature and high-speed response design for motor winding.
  • sensor Pt100 is covered by teflon shrinkable tube only
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • max. +200°C
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €13.90 excl. VAT