Products

Total 253 items

First 5 6 7 8 9 10 11 Last

one- range converter
isolation standard unipolar and bipolar signals
digital processing and transfer A/D and D/A
response time: 1ms, for order up to 300ms
accuracy 0,1%
power supply 18VDC for loop-powered transmitter on input
dielectric strength input / output / supply power 4kV
auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC

€114.90 excl. VAT

power supply 19..300VDC & 90..250VAC with galvanic separation 4kV
measurements
- RTD, Tc, R, U, I
- unified signals 0-20mA, 4-20mA, 0-10V ....etc.
- voltage or current DC
output 1x relay or analog output 0-20mA, 4-20mA, 0-10V
4 digit red LED
design for DIN rail
to display the measured value
monitoring of exceeding the set value

Price calculator DPR40

from €106.00 excl. VAT

RawetLoger_e.exe

two-state programmable switch for monitoring of electrical values or temperature
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
supply voltage 24V DC ± 10% with galvanic separation 3kV
DIN rail mounting
the temperature adjusting element is inside the housing

€110.10 excl. VAT

it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
easy connecting by connector M12x1 EC-FS4-L/16
for outdoor use, IP65, -50…+100°C

€29.60 excl. VAT

Related products

free download

stem from stainless steel diameter 4 or 3mm, min. length 15mm
it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
temperature range -10…+400°C
dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

Datasheet Price calculator PT37

from €22.10 excl. VAT

Related products

loop- powered 4..20mA
input standard unipolar and bipolar signals
one-range converter
response time: 1ms
accuracy 0,2%
dielectric strength input / output 4kV

€105.50 excl. VAT

analog current measurement
rectifier method of measuring the mean value
average value calibrated to RMS of sine wave
frequency range 40 … 1000Hz
conversion accuracy 0,5%
response time 300ms
isolation input-output: 4000Vef
self powered from input current for output 0..20mA
loop-powered for output 4..20mA

€82.00 excl. VAT

two-state programmable switch for monitoring of electrical values or temperature
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
supply voltage 230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
DIN rail mounting
the temperature adjusting element is inside the housing

€110.10 excl. VAT

converter with galvanic isolation 4000Veff
it is designed for transduction:
   - temperature from any thermocouple with linearization and cold junction compensation
   - temperature from RTD or resistance from resistance transmitter
   - voltage 0-1V DC
easy programming by AX-USB adapter (AY-USB)
power supply 8…30V DC
DIN 35 rail-mounted design

€106.50 excl. VAT

programmable converter with galvanic isolation 4000Veff input - output - power supply
it is designed for transduction:
DC voltage up to 540V
DC current 0..23mA, after an agreement up to 5A
communication by RS485 line with master device on baud rate 600..19200Bd
typically max. 56 transmitters on the line, distance max. 1200m
communication protocol ASCII or MODBUS-RTU

€123.30 excl. VAT

free download

direct analog current measurement up to 100A
current threaded through
rectifier method of measuring the mean value
average value calibrated to RMS of sine wave
frequency range 40 … 1000Hz
conversion accuracy 0,5%
response time 300ms
isolation input-output: 4000Vef
self powered from input current for output 0..20mA
loop-powered for output 4..20mA

€82.00 excl. VAT

2

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€101.70 excl. VAT

converter with galvanic isolation 3700Veff
it is designed for transduction:
   - temperature from any thermocouple with linearization and cold junction compensation
   - temperature from RTD or resistance from resistance transmitter
   - voltage 0-1V DC
easy programming by AX-USB adapter (AY-USB)
power supply 8…30V DC
slim design, DIN 35 rail-mounted, width 12,5mm

€106.00 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€108.80 excl. VAT

two-channel programmable converter
with galvanic isolation 4000Veff input - output - power supply
inputs are galvanic isolated max. 1000V!
is designed for transduction:
DC voltage up to 540V
DC current 0..23mA, after an agreement up to 5A
communication by RS485 line with master device on baud rate 600..19200Bd
typically max. 56 transmitters on the line, distance max. 1200m
communication protocol ASCII or MODBUS-RTU

€164.40 excl. VAT

GY200-1 GY200-2 GY200-3

free download

First 5 6 7 8 9 10 11 Last