Products

Total 253 items

First 6 7 8 9 10 11 12 Last

isolation converter GXN with lightning improved resistance
one-range converter
converter provides additional protection lightning arresters and wire resistors in inputs and outputs
response time: 1ms
accuracy 0,1%
power supply 18VDC for loop-powered transmitter on input
dielectric strength input / output / supply power 4kV
auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC

€131.00 excl. VAT

measurements
- measurements DC current or voltage both polarities
- outputs from Pt100 resistance thermometers or J,K thermocouples
- max. input ± 12V or ± 24mA
yellow-orange 5-digit OLED display
2 x alarm contact
universal power supply
panel design IP65

€129.10 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

from €105.80 excl. VAT

converter with galvanic isolation 4000Veff input - output
it is designed for transduction
   - temperature from any thermocouple with linearization and cold junction compensation
   - temperature from RTD, thermistors, KTY or NTC sensors
   - resistance from resistance transmitter (potentiometer) 0..320Ω, 0..2500Ω
easy programming by AX-USB adapter (AY-USB)
ultra-slim design, DIN 35 rail-mounted, width 6mm

€112.40 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

from €112.40 excl. VAT

free download

one-channel passive isolator
isolating converters 0/4..20mA with energy transfer
transfer 1:1 via transformer
input voltage drop 2,7V
accuracy 0,1%
response time 1ms
dielectric strength input / output 1,5kV

€48.20 excl. VAT

measurements
- DC current or voltage both polarities
- outputs from Pt100 resistance thermometers or J,K thermocouples
- max.input ± 11V or ± 22mA
5-digit 3-colors LED display ( height 14mm)
output open colector
universal power supply
panel design IP65

from €138.40 excl. VAT

Related products

digital processing of the input signal
calculated power factor cos φ
output linear with power factor cos φ
conversion accuracy 0,2%
response time 300ms
isolation input-output-power supply: 4000Vef
universal power supply 19 – 300V DC & 90 – 250V AC

€170.70 excl. VAT

converter with galvanic isolation 4000Veff input - output
it is designed for transduction:
- temperature from KTY temperature sensors and resistance transmitter 0-11kΩ
easy programming by AX-USB adapter (AY-USB)
ultra-slim design, DIN 35 rail-mounted, width 6mm

€112.40 excl. VAT

free download

two-channel passive isolator
isolating converters 0/4..20mA with energy transfer
transfer 1:1 via transformer
input voltage drop 2,7V
accuracy 0,1%
response time 1ms
dielectric strength input / output 1,5kV

€74.90 excl. VAT

measurements
- AC current or voltage
- frequency
5-digit 3-colors LED display ( height 14mm)
output open colector
universal power supply
panel design IP65

upon inquiry

Related products

digital processing of the input signal
phase angle measurement between current and voltage
phase angle measurement between current and voltage in the 3-phase 3-wire symmetrical balanced load grid
phase angle measurement between two voltages in different grids
output linear with phase angle φ in degrees
conversion accuracy 0,2%
response time 300ms
isolation input-output-power supply: 4000Vef
universal power supply 19 – 300V DC & 90 – 250V AC

€170.70 excl. VAT

converter with galvanic isolation 4000Veff input - output
it is designed for transduction:
- resistance transmitter (potentiometer) 0-11kΩ
easy programming by AX-USB adapter (AY-USB)
ultra-slim design, DIN 35 rail-mounted, width 6mm

€112.40 excl. VAT

free download

First 6 7 8 9 10 11 12 Last