Products

• basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• stem from stainless steel Ø8 or 10mm
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

• supply voltage: 230V AC ± 10% (45 – 65 Hz)
• output voltage: 24V DC, ±5%
• output power capacity: 0.5VA (22mA)
• protection: transformer with thermal fuse + electronic cut-out

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

• supply voltage: 230V AC ± 10% (45 – 65 Hz)
• output voltage: 24V DC, ±5%
• output power capacity: 5VA (200mA)
• protection: transformer with resettable thermal fuse

• measurement frequency in wide range 0..120kHz
• unipolar and bipolar input signl
• conversion accuracy  0,2%
• response time 300ms
• isolation input-output-power supply: 4000Vef
• universal power supply 19 – 300V DC & 90 – 250V AC

• 1 measuring inputs
• 3 outputs
• communication line
• simple program (ramp up, soak)
• option for the delayed start of the program
• start of the program with the key
• easy operation

• 1 measurement input
• three control outputs
• communication line
• simple program (2 x ramp-up, 2 x soak)
• possibility of delay in starting the program
• running a program using the keyboard
• simple operation

• 1 measuring inputs
• 3 outputs
• communication line
• ramp function 
• automatic / manual operation
• variable setting
• secondary controller in system "Master - Slave"
• secondary controller in cascde regulation

• 1 measuring inputs
• 3 outputs
• communication line
• 10 programs
• each program with 15 steps
• real time-clock
• datalogger with 500 measurements

• 1 measuring inputs
• 3 outputs
• communication line
• 3 independent programs
• max. 10 steps for program
• easy operation

• 1 measuring input
• 3 outputs
• control for heating as well as cooling
• communication line
• 20 programs with 15 steps
• start of the program with the key
• start of the program with the real-time clock
• observing of the program course
• datalogger, memmory of measured values
• easy operation

• 1 input
• 2 control outputs (heating, cooling)
• alarm output
• 4 event outputs
• 2 communication lines (PC, Master - Slave)
• 2 digital inputs
• 30 programs with 15 steps
• change in a program during its course
• start of the program with the key
• start of the program with the real-time clock
• datalogger, memmory of measured values

• 3 initial configurations of device:
  • meter / alarm unit
  • two-state controller
  • PID controller
• 1 measuring input
• 2 outputs
• communication lines

• 10 galvanic insulated inputs
• thermocouple inputs
• voltage inputs 0-5V, 1-5V, 0-10V
• current inputs 0-20mA, 4-20mA
• datalogger, max. 2000 logs
• 2 digital inputs
• communication line RS232, EIA485, protocol MODBUS RTU
• 2 alarm outputs

• thermowells
• adjustable threads
• welded-on pieces
• holder for air conditioning

• inbuilt transmitter PP200 powered from output current loop
• it is programmable for sensors Pt100, Pt1000, Ni 100, Ni1000
• current output 4-20mA
• programmable range, min. span 10°C
• accuracy ±(0,07%+0,1°C)
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PX300 powered from output current loop
• galvanic isolation input - output - power supply: 1200Veff
• transmitter with 4-20mA output is designed for:
     - temperature from any thermocouple with linearization and cold junction compensation
     - resistance from resistance transmitter (potentiometer)
     - thermistors, KTY, NTC e.t.c.
• easy programming range by AX-USB adapter (AY-USB) without power supply

• inbuilt transmitter PPL100
• it converts temperature from Pt100, Pt1000 or Ni1000 sensor to digital otput RS485
• transmitter has auto-recognize for Pt100 or Pt1000 sensors
• we can set it for other input signals too
• communication by RS485 line with master device on baud rate 600..19200Bd
• communication protocol ASCII or MODBUS-RTU

• maximum operating voltage: 3V
• input signal: resistance connected 3W
• serial resistance: 8,2 ohm
• voltage protection level core-PE at 10kA (8/20 μs): 300V
• voltage protection level core-core at 100A (8/20 μs): 12V

• it protect 2 wire opposite overvoltage rail-rail and rail-ground
• DC Breakdown (500V/s): 250V =
• surge current (8/20uSec): max. 20kA
• DIN 35 rail-mounted design

(You can see description of sensors after click on Types, detailed tables are below)

Attachment for downloads:
(in TXT format for easy linearization in PC)