Products

• sealed design, stem from insulation material
• -40…+150°C (class „F“)
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• leads are made from stranded wire with PTFE insulation, 2,5m length

• sensor is sealed into laminated plastic material and covered by teflon shrinkable tube
• -40…+180°C (class „H“)
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• leads are made from stranded wire with PTFE insulation, 2,5m length

• basic design 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -30…+80°C with PVC cable
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• basic design 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, PTC, thermocouples…
• temperature range -40…+200°C with cable MCBE-AFEP
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• basic design 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
• temperature range -10…+350°C with cable BIMV-CNTEVS
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
• mounting by special holder for air conditioning
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

• low voltage current transformers
• using in low voltage switchboards up to 2500A
• certified calibration
• customized on request

Continue HERE in new window please
(Czech language only)

• adjustable immersion length, adjustable thread M12x1,75 or G1/2 or others by request - inclusive hermetic design.
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -40…+150°C (T=c. 15sec)
• dielectric strength: 1500V, insulation resistance min. 20MΩ (circuit to metal parts)

• sensor Pt100 is covered by teflon shrinkable tube only
• it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
• max. +200°C
• leads are made from stranded wire with PTFE insulation, 2,5m length

• fast respons time (0,1ms)
• 8 calibrated ranges
• isolation unipolar and bipolar signals
• setting range by slid switch DIP on the board
• bandwidth : 0..5kHz for -0,5dB
• fast analog channel digitally driven
• accuracy 0,1%
• power supply 18VDC for loop-powered transmitter on input
• dielectric strength input / output / supply power 4kV
• auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC

• adapter for Programming Transducers with Galvanic Separation
• direct replacement for adapters AX-USB a PK-USB
• for transduceres:
     PP200, PP300, PMA300, PX300, PP210/212, PP210/S
     PP200-BOX, PP300-BOX, PX300-BOX
     PX310, PX310S,ISOL600, PXN30
     SIXISOL310, SIXISOL600
     TS30, TS30K, TS30DIN, DPR40
• programming software Rawet Studio

• digital processing of the input signal
• true RMS current measurement 
• signal processing with crest factor up 4,5
• frequency range 40 … 1000Hz
• conversion accuracy  0,2%
• response time 300ms
• isolation input-output-power supply: 4000Vef
• universal power supply 19 – 300V DC & 90 – 250V AC

• PP200 is mounted in a connection head DIN "B" dimension or any box
• converter without galvanic isolation, converts temperature from RTD to 4..20mA
• easy programming range by AX-USB adapter (AY-USB) without power supply
• the transmitter can be programmed for the types of sensors: Pt100, Pt1000, Ni 100, Ni 1000, KTY81..

• converter without galvanic isolation
• it converts temperature from RTD or resistance from resistance transmitter to 4..20mA
• easy programming by AX-USB adapter (AY-USB) without power supply
• power supply by output loop 8…30V DC, any polarity
• DIN 35 rail-mounted design

• for outdoor use, IP65, -50…+100°C
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

• zjednodušený princip měření pH
• doporučený postup kalibrace sondy s převodníkem PHXC
• tabulky převodu pH na mV, 0..10V a 4..20mA
• rady a řešení problémů

• basic design: 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -30…+80°C with PVC cable (T=c. 7sec)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -30…+80°C with PVC cable (T=c. 7sec)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)