Products

Total 253 items

First 2 3 4 5 6 7 8 Last

analog measurement of the input signal
transducer for measurement DC current or voltage
directly current measurements up to ±10A, voltage up to ±1000V DC
accuracy <0,1%
response time 1ms
dielectric strength input / output 4kV
loop powered

€105.50 excl. VAT

measurements
- RTD, Tc, R, U, I
- unified signals 0-20mA, 4-20mA, 0-10V ....etc.
- voltage or current DC
output of up to 4 relays, analog output, RS485
4-digit display (digit height 20mm)
LED display color red or green
power supply 19..300VDC & 90..250VAC
panel design
to display the measured value
monitoring of exceeding the set value

Datasheet Price calculator R24

from €95.80 excl. VAT

3

Related products

mounting on pipe with diameter 40-60mm by metallic cable tie or by stainless steel zip ties for any diameter
it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
accuracy according to used sensor

from €16.60 excl. VAT

Related products

4..20mA loop powered
Rated impulse voltage Uni: 6kV
converts signal:
- from any thermocouple with linearization and internal cold junction compensation
- from RTD, resistive transmitter or potentiometer
- NTC, KTY
user configuration of AY-USB adapter
accuracy <0.1%
version for mounting into switchboard on DIN 35 rail

Datasheet Protocol-EMC Protocol-50155 Protocol - vibration EU_ declaration_PX310_R

€126.90 excl. VAT

digital processing of the input signal
transducer for measurement DC current or voltage
allows unipolar and bipolar input and output signal
directly current measurements up to ±10A, voltage up to ±1000V DC
ability to measure absolute values and inverted signal
conversion accuracy <0,1%
response time 1ms, per order up to 300ms
dielectric strength input / output / supply power 4kV
universal power supply 19 – 300V DC & 90 – 250V AC

€120.30 excl. VAT

24 calibrated ranges
isolation unipolar and bipolar signals
setting ranges by slid switches DIP on the board
digital processing and transfer A/D and D/A
response time: 1ms, adjustable to 100ms by switch
accuracy 0,1%
power supply 18VDC for loop-powered transmitter on input
dielectric strength input / output / supply power 4kV
auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC

€120.30 excl. VAT

2

adapter for Programming Transducers with Galvanic Separation
direct replacement for adapters AX-USB a PK-USB
for transduceres:
   PPL100, PPL110, PPL112
   PXL310, PXl312
   PPL100-BOX
programming software Rawet Studio

€54.20 excl. VAT

Related products

digital processing of the input signal
true RMS current measurement
signal processing with crest factor up 4,5
frequency range 40 … 1000Hz
conversion accuracy 0,2%
response time 300ms
isolation input-output-power supply: 4000Vef
universal power supply 19 – 300V DC & 90 – 250V AC

€123.10 excl. VAT

transmitter is mounted in a connection head DIN "B" dimension or any box
easy programming by AX-USB adapter (AY-USB) without power supply
transmitter with 0..10V ouput is designed for:
- any RTD sensor, resistance transmitter or potentiometer 0..100Ω, 0..1kΩ and 0..10 kΩ
- voltage 0..10V, thermistors..

€64.20 excl. VAT

Related products

two-channel converter PP210 without galvanic isolation
it converts temperature from RTD or resistance from resistance transmitter to 4..20mA
easy programming by AX-USB adapter (AY-USB) without power supply
each channel can be set independently
power supply by output loop 8…30V DC, any polarity
DIN 35 rail-mounted design

€138.60 excl. VAT

It provide a voltage corresponding pH value in range 0..14
optional output 4..20mA, 0..10V or MODBUS
dielectric strength input / output 1,5 kV
DIN 35 rail-mounted design
2-wire temperature compensation Pt, Ni
calibration in 2 points 10/4pH and 7pH

€151.70 excl. VAT

Related products

active output 4-20mA or 0-20mA or 0-10V resp. inverse transfers
converts signal:
- from any thermocouple with linearization and internal cold junction compensation
- from RTD, resistive transmitter or potentiometer
- NTC, KTY
user configuration of AY-USB adapter
Rated impulse voltage Uni: 6kV
auxiliary power supply in a wide range of 16-300V DC and 90-250V AC
accuracy <0.1%
version for mounting into switchboard on DIN 35 rail

Datasheet Protocol-50155 Protocol-EMC Protocol - vibration EU_ declaration_PXN30_R

€137.60 excl. VAT

free download

measurements in 1-phase grid
- RMS voltage or current
- active or reactive power
- phase angle
- power factor
- RMS current with direction ( supply or consumption)
output of up to 2 relays, analog output, RS485
4-digit display (digit height 20mm)
LED display color red or green
power supply 19..300VDC & 90..250VAC
panel design
to display the measured value
monitoring of exceeding the set value

Price calculator R24AC

from €118.40 excl. VAT

2

Related products

for outdoor use, IP65, -50…+80°C
it can be use transmitters
   - PP200 with output 4…20mA
   - PP300 with output 0…10V
   - PPL100 with output ASCII or MODBUS
power supply by output loop 8…28V ss, ripple max. 0,5V
any measuring range <-50…+80>°C, min. span 50°C
accuracy ±0,5% from span (max. ±0,25°C)
another parameters are shown in the datasheet of used transmitter

€96.80 excl. VAT

2

Related products

mounting on pipe with diameter 40-60mm by metallic cable tie or by stainless steel zip ties for any diameter
it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
accuracy according to used sensor

from €38.10 excl. VAT

Related products

basic design: 6x50mm Pt100/B with cable 4w 1m
it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
temperature range -40…+200°C with cable MCBE-AFEP (T=c. 7sec)
dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

Datasheet Price calculator PT30/31

from €23.30 excl. VAT

Related products

screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
temperature range -40…+200°C with cable MCBE-AFEP (T=c. 7sec)
dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

Datasheet Price calculator PT30/31

from €28.40 excl. VAT

2

Related products

4-20mA loop-powered
transducer for measurement DC current or voltage
directly current measurements up to ±10A DC, voltage up to ±1500V DC
analog measurement of the input signal
accuracy <0,1%
response time 1ms
rated impuls voltage Uni: 8kV
dielectric strenght Ua input / output: 5kVrms
clearances and creepage distances min. 8mm
designed for DIN 35 rail mounting

Datasheet Protocol-EMC Protocol-50155 Protocol - vibration EU_ declaration_PX24_R

€125.90 excl. VAT

mounting on pipe with diameter 40-60mm by metallic cable tie or by stainless steel zip ties for any diameter
it can be use transmitters
   - PP200 with output 4…20mA
   - PP300 with output 0…10V
   - PPL100 with output ASCII or MODBUS
power supply by output loop 8…28V ss, ripple max. 0,5V
any measuring range <-50…+80>°C, min. span 50°C
accuracy ±0,5% from span (max. ±0,25°C)
another parameters are shown in the datasheet of used transmitter

€85.10 excl. VAT

Related products

First 2 3 4 5 6 7 8 Last